DRM Tubular membrane
Tubular membranes, made of different kinds of polymer, are located on the inside of support layers with diameter of 8 & 12.7mm and length of 300-1500mm. PVC, FRP and SS housings filled with membranes constitute membrane modules depending on requirements.Product features
- Crossflow: Unlike the dead-end filtration, cross-flow filtration allows systems to sustain higher flow rates to filtrate high strength industry wastewater with less membrane fouling.
- Simple process: The filtration and cleaning process are highly automatic and easy to operate so that can lower the cost of operating.
- Long service life: Due to its chemical resistance, the membrane modules can be cleaned efficiently by alkaline and acid. As a result, tubular modules offer years of effective and function-well performance.
管式膜工作原理
管式膜過濾流程
管式膜應用
Performance
MORE| 指標 | Unit | Specification | |||||
| PVDF | PES | ||||||
| Pore Size | nm or Dalton |
50nm | 30nm | 15000 | 50nm | 30,000 | 5,000 |
| Water Flux | LMH (100Kpa) |
500 | 250 | 50 | 500 | 130 | 15 |
| Diameter | mm | 8、12.7 | |||||
| Max. Pressure | kpa | 50~1000 | |||||
| Max. Temperature | °C | 60 | |||||
| pH Range | - | 2~10 | |||||